How to make a doll chair

Children very often encounter a problem, where can I put a doll? They want them to be able to sit on a chair. You can buy chairs for dolls in the store. And you can do it yourself. The latter option is better, since the child himself will participate in the assembly process, expressing his wishes. It is also a good way to find your child a hobby.

Material selection

There are several dozen ways to make a chair for a doll. Materials may be as follows:

1. Toilet paper and cardboard.
2. Iron can of canned food.
3. Champagne corks.
4. Clothespins.
5. Plastic.
6. Plastic bottles.
7. Plywood.
8. Multi-colored napkins and cardboard.
9. Metal.
10. Wire and paper.
11. Tree.
12. You can make bar stools from cardboard, fabric and foam.
13. It is possible to make stools based on metal bottle caps.

Attention! People often combine several materials from the above. This allows you to experiment, and the result will be what you want. It all depends on the imagination.

How to make measurements and drawings?

Work begins with sizing. You can draw a sketch of the future chair. And you can make measurements using the doll itself.

All sizes will depend on the size of the doll itself. Average values:

1. The height of the stool is 8 centimeters.
2. Sitting 10x10 centimeters.

What tools will be required?

To create a chair you need the following tools:

1. Plain paper.
2. Cardboard.
3. Self-tapping screws.
4. Glue (both PVA and super glue).
5. The cloth.
6. Twisted cord.
7. Stationery knife.
8. Scissors.
9. Ruler.
10. Acrylic paint.
11. Sticks for balloons.

Chair for dolls: step by step instructions

Here is one of the simplest and most common ways.

The creation process is as follows:

1. Need to cut 10 cardboard squares 10x10.
2. Glue them with PVA glue. We are waiting for it to dry.
3. We begin to create legs. To do this, you need a stick for a balloon. Cut 4 pieces of 7 cm each.
4. Using scissors, it is necessary to cut several strips of paper. They are needed to glue the legs.
5. Glue them to the legs using PVA. The shape of all 4 legs must be identical, otherwise the design will not be stable. We wait until the glue dries.
6. If any irregularities appear on the legs, they can be smoothed out with sandpaper.
7. As soon as the seat blank is dry, the excess must be cut off with an office knife. The edges of the square should be flat.
8. On the seat, you need to mark the places where the legs will be installed. We screw in the screws there.
9. Legs are put on the bottom of the screws. We use super glue for gluing.
10. We cover the chair with a silt primer with acrylic paint. Color depends on wishes.

After creating the chairs, you can start creating other furniture in the same way. After gaining experience in such things, the child will be able to create a whole house for dolls with his own hands.