How to connect the speaker to the phone via bluetooth

Now a smartphone is not only a way of communication. This gadget is actively used to listen to music and watch videos. But there is one caveat - the speakers of the phone do not always produce high-quality sound. Because some users connect bluetooth speakers to the smartphone.

Connecting speakers to a phone via bluetooth: features

First, it is worth noting that column manufacturers have a certain standardization. So, two main connection methods are used:

1. Connect via Bluetooth - this feature is located on any tablet or smartphone. Therefore, this method is considered universal. Also, it does not require wires, but this option is considered the most energy-intensive.
2. Connection via audio cable. Certain manufacturers in the Bluetooth speakers install the appropriate connector. This has a clear advantage: through the wire, sound is transmitted much better.

Reference! Very rarely, manufacturers of bluetooth speakers use some other sound reception options. For example, some may use Wi-Fi for this. But this method is not universal, since not all smartphones can transmit sound via Wi-Fi.

What difficulties may arise

If the phone on the android does not see bluetooth, then in this case it makes no difference the model of the phone or the Jibiel speakers. The bluetooth standard is universal and in case of problems, there are several causes of malfunctions:

1. Bluetooth is disabled on the smartphone. This is the first thing to check. Open the smartphone settings, make sure that the mode is active.
2. The speakers are discharged or disabled. In certain columns, you need to hold the power key for at least 5 seconds to activate the headset.
3. The headset was synchronized with other equipment or not connected correctly. In some cases, the headset that was paired via bluetooth with another device is not connected to the new smartphone. Just the headset connects automatically to the first phone, and after that the synchronization mode is turned off. To activate it again, you need to hold the power key until the indicator lights up. A window will appear on the smartphone to enter the connection code. The standard code is 0000.

How to solve the problems

Why does my smartphone not see a bluetooth headset? This question can be met quite often. It's just that for many years such a headset has been very popular. Since it is quite convenient, especially for drivers. In addition, subject to traffic rules, it is forbidden to talk on the phone while driving. That is why wireless speakers and microphones are used. But, despite this, most users do not know how to use them.

Why you need to know certain nuances and rules of use. In addition, first you need to pair the devices. In other words, add a headset to the list of connections. Moreover, in order to prevent some inconvenience, after synchronization of the device, the speakers will not be connected by other phones.

There are only three reasons:

1. The battery is low.
2. Sync mode not enabled.
3. Headset is disconnected.

The reasons why the smartphone does not see the headset a bit. And they all consist of equipment that connects. It's just that there are almost no settings on smartphones. You can only enable and disable bluetooth and activate the detection mode.

Attention! There simply are no other reasons, since no settings exist. In addition, Bluetooth works at the same frequency, because there are no divisions by brand and speaker manufacturer.

Step-by-step connection of the speaker via bluetooth to the phone

If you purchased a bluetooth speaker, you will certainly want to connect it without using a wire. As a rule, Bluetooth is used for wireless connection. Its version does not matter - it only affects the cost of energy and the radius of reception.

The easiest way is to wirelessly connect a bluetooth speaker if it and the phone are equipped with an NFC chip. If it is available, then just attach the headset to the cover of the smartphone, after that the devices are synchronized with each other in automatic mode - it will only be necessary to confirm this connection by pressing the "OK" key.

If NFC is absent in any of the devices, it will be necessary to connect in manual mode. Most often this needs to be done only once. This is done this way:

1. Activate the wireless speaker with the power button.
2. Go to the notification panel on the phone.
3. Hold your finger on the Bluetooth key. You can also go to the appropriate menu using the "Settings".
4. In this case, you must first turn on Bluetooth, if it was previously turned off. Why do you need to use the appropriate switch, which is located at the top of the menu.
5. Use the Search key. If Bluetooth has just been activated, then the search for nearby devices usually starts automatically.
6. All Bluetooth devices connected at that time and located in the field of visibility should appear on the phone’s display. Click on the device that by name resembles a model of a wireless speaker.
7. The phone activates the synchronization procedure. It is likely that it will be necessary to enter a specific code, which is located somewhere below the column. Or they may be asked to perform other actions with the device - for example, hold the power key for 5 seconds. But much more often for effective pairing it is absolutely not necessary to perform any kind of manipulation.

Subsequent connection to the speaker will occur automatically when the headset is turned on. Naturally, for this, the phone must have Bluetooth turned on.

Most owners of a wireless headset are wondering which connection method is the most convenient. Almost all users recommend Bluetooth. But do not forget that through this connection, sound is transmitted in a compressed format, unless the headset and phone support AptX. But, still portable speakers are small in size, so they physically can not reproduce the highest quality sound.