Due to its mobility, a laptop is an indispensable thing. It is easy to transfer it anywhere and regardless of location to watch movies, contact with friends and partners. For comfortable use, the laptop should be placed on a flat and hard surface. In most variants, it is placed on the lap, which is not very convenient. However, to make his own stand for a laptop is a snap.
In general, the design of tables for laptops are identical. Differences can be found in the design and some functional features. Most often, wood is used as a material. Pine is considered to be quite durable and lightweight. You will need wooden shields, the dimensions of which are selected with regard to the future product. You can also use plywood or chipboard. Consider making a standard wooden table. You will need the following materials:
- wood glue;
- paint, brush, coating for wood;
- sandpaper;
- hammer nails;
- saw, jigsaw;
- primer.
IMPORTANT!When using plywood, its thickness must be at least 5 mm.
Before starting work, you should prepare materials and draw a diagram of the future product. Notebook dimensions may be different, so you need to choose the optimal size for a particular device. First you need to make blanks. With a simple pencil sketch is easily transferred to a wooden base. Cutting out forms is one of the most difficult stages of work. In this example, it is recommended to prepare the following details:
- worktop 66.5 x 30 cm;
- legs 2x2 cm thick and 23 cm long;
- side apron 28 cm. in length .;
- two long apron parts of 63 cm.
On average, even an inexperienced master can make a similar design in a couple of days. Observe a specific sequence of actions:
- The legs around the edges are better polished to make them look more aesthetically pleasing. This operation can be done as a special tool or manually.
- Place the countertop face down onto the work surface and glue all parts of the apron with glue. For firm grip, press down firmly. It is better to clean up excess glue immediately with a sponge so that there are no unsightly spots.
- Then flip the countertop to the other side and attach the nails to the apron.
- Turn the tabletop again and strengthen the legs in the corners with glue and screws. Each must be secured on both sides. The main thing is not to overdo it with the length of the screws so that they do not crawl out.
- The work is almost finished. It is recommended to leave the table for a day for complete drying.
- Next, the tabletop is sanded with sandpaper, and it becomes smooth.
- If the item was combined from several plates, then the surface is primed and leveled with putty.
REFERENCE!You can show imagination and, if desired, make a notch in the worktop for various appliances. Lovers will appreciate it in bed with a laptop and a cup of tea.
In the hardware store it will be easy to choose the color of the paint, which will be in harmony with the style of the room. It is more convenient to use materials that dry quickly. Paint is best applied in several layers. The fact is that many of them are good liquid absorbents. So, when drying, gaps appear. Sometimes after the initial coloring the paint is not noticeable.
It is recommended to clean the surface with fine-grained sandpaper. Also on top you can apply a colorless matte or glossy varnish. The process of varnishing is much easier than painting. Vinyl stickers are also better covered with a layer of varnish, so that they retain their original appearance longer.
ATTENTION!When dyeing with a brush it is necessary to drive only along the fibers, constantly making sure that there are no smudges.
A table for a laptop is an indispensable thing for those who spend a lot of time at the computer. In addition, it is multifunctional and can be used as a breakfast tray or bench. We hope that this article will be useful and will help to make this useful object with his own hand.
Leave Your Comment